null

USA Lab Spray Dryer Mini - Refurbished




Brand :

$11,500.00
SKU:
USA-SD-M-RF
Current:
3.6KW / 16.4A
Voltage:
220V, 60HZ
Evaporation capacity:
2000ml/h
Dry air flow:
70m3/h(MAX 600m3/h, 1000Pa
Fan power:
400 W
Inlet air temperature:
30-250℃ ±1℃
Heating capacity:
3 KW
Heating control:
PT-100 Sensor/PID/±1℃
Average drying time:
1.0-1.5s
Dimensions:
650×570×900mm | 25.6 x 22.5 x 35.43"
Weight:
60KG | 132lbs

*This is a refurbished unit and comes with a 30 day warranty*

*Air Compressor Not Included*

The USA Lab Spray Dryer can be used to dry aqueous solutions and suspensions.It is suitable for experiments and production where the product is required to be uniform in powder form.

* No organic solvents, only aqueous solutions * 

Spray drying is accomplished by dissolving, emulsifying or dispersing the core substance in a solvent or in a solution of carrier material. The material is then atomized and sprayed into the drying
chamber where a hot stream of drying gas helps evaporate the solvent to produce dry solid particles. These particles are further separated from the gas stream and collected using centrifugal
forces with a cyclone

Common uses for the mini spray dryer include: pharmaceuticals, dyes, food, beverages, pigments, milk etc.

This instrument is suitable for the laboratory to directly convert liquid materials into micro powders, without the need to filter, concentrate and crush the materials before drying. The Spray Dryer has broad-spectrum applicability to all solutions such as emulsions and suspensions along with a pneumatic atomization spray system.

 

Specifications

Power consumption

3.6KW | 16.4A | NEMA 6-20 plug

Voltage

220V 60HZ

Evaporation capacity

2000ml/h @ 70% Yield Maximum

Dry air flow

70m3/hMAX 600m3/h) | 1000Pa

Fan power

220V @ 400W | Variable Flow

Inlet air temperature

30-250 ±1

Outlet temperature

30-120 ±1

Heating capacity

3.0KW

Heating control

PT-100 Sensor | PID | ±1

Air compressor

250W | MAX 4.2m3/H | 29 - 116 psi

Spray system

Pneumatic Atomization

Average drying time

1.0-1.5s

Automatic unblocking function

Automatic nozzle clearing with adjustable frequency

Control System

Siemens S7-200smartPLC w/ 7 inch touch screen

Glass components

3.3 Borosilicate glass

Nozzle/heater/cyclone separator

316L stainless steel

Seals

PTFE

Product feed pipe

Silicone Rubber

Exhaust pipe

Polyurethane

Dimensions

650×570×900mm | 25.6 x 22.5 x 35.43"

Weight

60KG | 132lbs

Manual

*Click me* 

Air Compressor

Included

 

 

 

For Technical Support, Questions, or Other Issues Please Email or Call Us!

usa-lab-logo-with-phone-number.jpg

Current:
3.6KW / 16.4A
Voltage:
220V, 60HZ
Evaporation capacity:
2000ml/h
Dry air flow:
70m3/h(MAX 600m3/h, 1000Pa
Fan power:
400 W
Inlet air temperature:
30-250℃ ±1℃
Heating capacity:
3 KW
Heating control:
PT-100 Sensor/PID/±1℃
Average drying time:
1.0-1.5s
Dimensions:
650×570×900mm | 25.6 x 22.5 x 35.43"
Weight:
60KG | 132lbs