null

1/2" MNPT Generant Cryogenic Relief Valve - 25PSI -196°C to 176°C




Brand :

$65.00
SKU:
CRV-25-1/2
UPC:
840215211552
Brand:
Generant
Connection:
1/2" MNPT
Pressure Rating:
25 PSI

The Generant Series Brass CRV, Cryogenic Relief Valve is a spring reference over pressure protection device. The CRV incorporates Generant’s exclusive “Dirt Guard” feature which increases the valves ability to tolerate particulate contamination. This device is ideally suited for use as a “Blocked Line Safety” in cryogenic systems. The CRV is supplied cleaned and packaged for oxygen service. Relief pressure can not be altered or adjusted in the field. Seat and poppet geometry combined with optimized spring ranges provide high flow rates with minimum pressure accumulation. The Generant Cryogenic Relief Valve has a compact design and availability of a variety of inlet and outlet configurations reduces size and piping requirements. Relief pressure can be discharged to atmosphere or to a downstream connection. The CRV is supplied with Flourosilicone seals for set pressures from 10 – 49 Psig (0.7 – 3.4 Bar) and PCTFE seals for set pressures greater then 50 – 750 Psig (3.5 – 51.7 Bar)

 

FEATURES

• Available CE marked in accordance to the requirements of the PED
• Exclusive “Dirt Guard” poppet incorporates screen to extend valve and reliability
• High Flow Capacity and Excellent Reseat Performance
• Supplied Factory Preset Set and Permanently Locked for Tamper Proof Service
• Discharge to Atmosphere or a Wide Varity of Inline Piping Configurations
• Optional Deflector Cap available for diverting exhausted gas
• 100% Factory Tested for Leakage, Crack and Reseal
• Cleaned and Packaged for Oxygen Service

 

 

Cryogenic Relief Valve (CRV) Technical Data

Nominal Set Pressure Range

10 – 750 Psig (0.7 to 51.7 Bar)

Factory Set Tolerance*
*tolerance specifications per

EN ISO 4126-1

Set Pressure ≤ 28.90 Psig, ± 5%

Set Pressure 29.00 – 48.30 PSI, ± 1.45 Psig

Set Pressure ≥ 48.40 Psig, ± 3%

Zero Leakage to

95% of Set Pressure

Full Rated Flow @ 110% of Set Pressure

Unaffected by up to 10% Back Pressure

Materials of Construction

Brass Body Construction

Reseat

90% of set pressure

85% for PCTFE seal set below

100 Psig (6.9 Bar)

Temperature Rating

-320º to 350ºF (-196ºC to 176ºC) based on seal material

Lubricant: Krytox®

 

 

For Technical Support, Questions, or Other Issues Please Email or Call Us!

Brand:
Generant
Connection:
1/2" MNPT
Pressure Rating:
25 PSI
Fittings and steel do NOT carry any warranty. Fittings and steel items with a defect or other issue must be identified within 30 days of arrival and USA Lab MUST be contacted. After 30 days, there will be no replacements sent for fittings or steel items with a defect or issue. Cross threading, misuse, improper storage, or improper care of fittings/steel are considered user error and are not covered under warranty.