If you can imagine it, we'll engineer it.
Custom equipment, full systems, formulations, and process R&D, backed by a staff chemist and our own fabrication shop. From a single modified part to a whole production line we design, build, and help you run.
Off-the-shelf wasn't built for your process.
Generic equipment forces you to adapt your workflow to the gear. When precision, throughput, and safety are on the line, "close enough" costs you.
Lost throughput
Equipment that almost fits creates bottlenecks, workarounds, and wasted cycles that compound every shift.
Safety compromises
Wrong materials, ratings, or fittings for your chemistry put your people and your compliance at risk.
No room to scale
Stock gear locks you into one capacity. When demand grows, you're buying all over again instead of scaling up.
Three ways we build with you.
Three distinct kinds of work under one roof — fabrication, chemistry, and the expertise to run it. Most projects pull from more than one, and it's the same team start to finish.
Build to spec
You have a drawing or a clear idea. We engineer it, get your CAD sign-off, and fabricate it in-house — from one modified part to a full system.
- Tanks, reactors, columns & vessels
- Distillation & extraction systems
- Skids, frames & custom glassware
R&D & formulation
You have a problem to solve or a product to develop. Our staff chemist runs the bench work — formulations, process development, and proof of concept.
- Product & formulation development
- Process R&D and optimization
- Polymerization, extraction & pilot work
Consulting & commissioning
You need the expertise around the equipment. We help select, install, dial-in, and document your process — from a single call to a full lab build-out.
- On-site setup & training
- SOPs, peer review & troubleshooting
- Full lab design & workflow
Spec it, and it's on the table.
Equipment, systems, chemistry, or supply, in metal, glass, or plastic. If it can be specced, we've likely built it, and if we haven't, we'll engineer it with you from a blank sheet.
Tanks, Vessels & Pressure Equipment
Stainless or alloy, jacketed, custom ports and fittings, and sanitary finishes, built to your dimensions and pressure spec.FabricationReactors & Distillation Systems
Glass and stainless reactors, short-path and wiped-film systems configured to your throughput.SystemsCustom Glassware
Modified or scratch-built borosilicate to your drawings: flasks, columns, custom joints and geometries.GlassCustom Formulations & Solvents
Specific concentrations, blends, grades, and denatured formulas, from a single batch to standing supply.ChemistryTransfer & Process Systems
Pumps, manifolds, transfer assemblies and skids built around your existing line and footprint.ProcessPrivate Label & Branding
Laser-etched logos, custom labels, color, and documentation so it ships ready for your shelves.Branding… and plenty more. This is just a slice of what we build — tell us what you need.
Custom vs. close enough.
Stock equipment is faster to buy and slower to live with. Here's where a build to spec pulls ahead.
A few things we've made real.
Custom builds across extraction, processing, and research. Every one started as someone's spec.
We build the whole line — or any piece of it.
From concept to commissioning we design, source, fabricate, integrate, and support complete process systems — or any single component within them.
/ Every project is drawn up and approved before we build or source a thing.
From first call to running process.
Tell us the goal
A spec, a sketch, or just a problem to solve. The more detail, the faster we move — but a goal is enough to start.
Scope & engineer
Our team — chemist and engineers — confirms approach, materials, and timeline, then quotes it.
Design & CAD
Drawings or a 3D model for your sign-off. Revise until it's exactly right — before anything is built.
Source & integrate
We build what we build best and source the rest — pumps, glass, fittings, instrumentation — into one system.
Test & validate
Built, tested, and documented — leak checks, dialing-in, SOPs, and the paperwork your process needs.
Deliver & commission
Shipped, installed, and dialed in. We help you get it running — and set up for next time.
Most builds ship in 4 to 12 weeks.
Speed is core to how we work. Simpler builds finish in as little as 4 weeks; complex systems run up to 12 — and you approve the design before we build or source anything.
A working lab behind the build.
Most equipment companies stop at the sale. We have a staff chemist in-house who can take a project from a question on a whiteboard to a validated, repeatable process — and a shop that can build whatever that process needs.
We don't just sell the gear. We solve the chemistry.
Bring us a yield problem, a new product, a scale-up, or a process you can't get to run right. Our chemist does the R&D and formulation; our engineers build the system around it — including a pilot rig to prove it out before you commit to capital. One team, idea to production.
Talk to our chemist
Installed at Natures TicketWe have been very happy with the team at USA Lab. They helped us figure out what equipment was right for us to achieve our goals when we were building our lab. We also ran into some challenges while dialing in the equipment, so we utilized some of their consulting services. Dale assisted us in getting our production numbers up to the level we needed, and that was a game changer. We will continue to utilize their products and services throughout the different stages of our growth and view them as a valuable partner.
Tell us what you need built.
The more you share, the faster we can scope it. A project specialist follows up, usually within one business day. No project too small or too big.
Request a Custom Solution
Fields marked * required. We reply within one business day.
Custom, demystified.
01What can you actually build?
02What's the typical turnaround?
03How much does a custom build cost?
04Can you modify an existing USA Lab product?
05Will I see drawings before you build?
06Do you offer private label or custom branding?
07What if I'm not sure exactly what I need?
08Can you provide certifications and documentation?
09Do you offer financing or net terms?
10Can you ship nationwide, including freight and hazmat?
Have something in mind? We'll make it real.
Send us your requirements and a custom project specialist will come back with a plan, pricing, and a timeline — and we'll beat any competing quote.