|
RE-1050 Specifications |
|
|
Glass Material |
GG-17 Borosilicate Glass |
|
Evaporation Flask Capacity |
50L |
|
Collection Flask Capacity |
20L |
|
Rotary Speed |
20-120rpm |
|
Bath Temperature Range |
Room Temp to 180°C (356°F) |
|
Lifting Mechanism |
Electric |
|
Power Requirements |
220-240V 60Hz 30A Single |
|
Temperature Control Accuracy |
+/-1°C |
|
Motor Wattage |
250W |
|
Heater BTUs |
22,000BTU |
|
Achievable Vacuum |
399.9Pa |
|
Evaporating Capability |
Water≥7L/H; Alcohol≥15L/H |
|
Water Bath Volume |
77L |
|
Dimensions |
52"L x 30"W x 84"H |
|
Main Condenser Surface Area |
0.91m² |
|
Auxiliary Condenser Surface Area |
0.52m² |
|
Speed Regulation |
Digital Step-Less |
|
Vacuum Barb |
13.3mm |
|
Condenser Barb |
15.5mm |
|
RE-1050 Packing List |
|
|
USA Lab 50L RE-1050 Rotary Evaporator Base |
1 set |
|
Main Condenser |
1 pc |
|
Auxiliary Condenser |
1 pc |
|
50L Boiling Flask |
1 pc |
|
20L Receiving Flask |
1 pc |
|
Three-Way Bump Trap |
1 pc |
|
Vapor Duct with Seal (Pre-Installed) |
1 set |
|
PTFE Vacuum Sealing Kit (Pre-Installed) |
1 set |
|
Glass Vacuum Port with PTFE Valve |
4 sets |
|
Glass Feeding Tube with PTFE Valve |
2 sets |
|
PTFE Feeding Tube Extension Hose |
1 pc |
|
Vertical Stand |
1 pc |
|
Vacuum Gauge |
1 pc |
|
Support Ring |
2 pcs |
|
Rubber Strap for Condenser |
1 pc |
|
Clamp with PTFE Gasket |
7 sets |
|
Evaporating Flask Screw Aid |
1 pc |
|
Allen Key |
2 pcs |
|
63A Fuse |
1 pc |
|
Screw Nuts for Clamps |
2 pcs |
|
Springs for Clamps |
2 pcs |
|
Gasket for Clamps |
4 sets |
|
Super Lube Vacuum Grease |
1 pc |
|
Vacuum Hose |
10ft |
For Technical Support, Questions, or Other Issues Please Email or Call Us!
