The USA Lab Sintered Filter Disk allows for finer filtration during the extraction and post-extraction process. These sintered disks are a true seal, welded in between two ferrules supported by a crisscross bottom plate and a welded ring on top. The sintered disk has a bottom and top protected 316 layer with the .5μm, 1μm or 5μm disk in between. This prolongs the filter disk.
|
Sintered Disk Specifications |
|
|
Material |
316 Stainless Steel |
|
Max Low Temperature |
-80°C |
|
Micron Size |
.5μm, 1μm & 5μm |
|
Weight |
Varies |
|
Pressure Rating |
300psi |
|
Size |
Various Tri-Clamp |
For Technical Support, Questions, or Other Issues Please Email or Call Us!
Fittings and steel do NOT carry any warranty. Fittings and steel items with a defect or other issue must be identified within 30 days of arrival and USA Lab MUST be contacted. After 30 days, there will be no replacements sent for fittings or steel items with a defect or issue. Cross threading, misuse, improper storage, or improper care of fittings/steel are considered user error and are not covered under warranty.
