null
Categories

Rebuilt Edwards E2M80 Dual Stage Rotary Vane Vacuum Pump- 56.5cfm (COMPLETE REBUILD w/DOLLY)




MSRP: $15,600.00
$6,950.00
(You save $8,650.00 )
SKU:
U-E80-VP-REBUILD
UPC:
840215208965
Shipping:
Calculated at Checkout
Condition:
Used
Brand:
Edwards
Displacement CFM:
56.5
Motor Specifications:
3 Phase, 208-230/460V, 50/60Hz. Dual Voltage Motor.
Oil Compatibility:
Inland 70 | PFPE for Caustic Applications
Listed Ultimate Vacuum:
7.5 x 10-4 Torr
Warranty Period:
1 Year Warranty

 

*Used*

*A full rebuild has been preformed including outer paint job, new seals, rotary veins, and filters.*

Technology

Reliable system protection devices: Every pump has protection devices to prevent oil and air suck-back into the vacuum system if the pump stops while under vacuum. A variety of protection devices are used, depending on the pump size and cost, but emphasis is always placed on reliability and simplicity. When you use gas ballast on some of the pumps, you must use a solenoid operated gas ballast control valve to prevent air suck-back.

Positive Pressure Oil Lubrication: The EM pumps incorporate a well proven positive pressure oil lubrication system which as been developed by Edwards to ensure correct lubrication in all duty modes and particularly to prevent oil starvation with high gas loads.

An integral oil pump ensures that a more than adequate oil flow is pumped throughout the stator/rotor assembly at all times.

This oil lubrication system means that the level of oil in the reservoir is less critical than with other pump designs. All pumps can operate with oil levels as low as 50-70 of the maximum. A full length, easily visible oil level sight glass allows you to conveniently monitor the oil level.

Gas Ballast Facility: The EM pumps have a gas ballast valve. The valve is used to introduce a suitable gas into the stator during the compression stage: this prevents condensation of vapors inside the pump, dilutes and ejects corrosive gases and purges the oil of gases and vapors. Therefore, the use of gas ballast reduces oil degradation and pump corrosion.

Low Noise Levels: The EM pumps maintain Edwards’s reputation for quiet operation pumps with a typical noise level of 70 dB(A).

Pumping Systems: The EM pumps, with suitable accessories, can partner a variety of other types of pump in vacuum systems for industry and for research. A special feature of the E2M80 is the central vacuum inlet which enables you to fit a mechanical booster pump with a minimum overhang, to create compact combination pumping systems.

Easy Maintenance: The advanced lubrication system allows the EM pumps to work with wide oil level tolerances, which reduce the need to top-up the oil.

All EM pumps are constructed with internal dowels, which reduce the need for skilled setting of tolerances, when the pump is dismantled. The pumps are designed so that all key components are easily accessible. The exhaust valve seals and oil distributor seals are exposed after the top cover is removed. The shaft seal can be replaced quickly without stripping down the pump.


Applications

Vacuum metallurgy processes

Thin film coating technologies

Pharmaceutical freeze drying

Refrigeration and air conditioning system evacuation, drying, and backfilling

Transformer and cable drying and impregnation, insulating oil treatment plant

Lamp manufacture

Cryogenic vessel evacuation

Vacuum drying and distillation in chemical industries

Semiconductor device manufacture

Backing pump for high vacuum applications


Specifications



 

 

 

 

 

For Technical Support, Questions, or Other Issues Please Email or Call Us!

  

Condition:
Used
Brand:
Edwards
Displacement CFM:
56.5
Motor Specifications:
3 Phase, 208-230/460V, 50/60Hz. Dual Voltage Motor.
Oil Compatibility:
Inland 70 | PFPE for Caustic Applications
Listed Ultimate Vacuum:
7.5 x 10-4 Torr
Warranty Period:
1 Year Warranty

Customers Also Viewed